audio level interpreter PCBs for analog or AES/EBU digital audio
![]() |
![]() |
![]() |
![]() |
53 segments analog ALI-53A |
53 segments digital ALI-53D |
106 segments analog ALI-106A |
106 segments digital ALI-106D |
audio level interpreter PCB Accepts and interprets analog
or AES/EBU digital audio signals and generates a range of audio parameters for
display. |
ALI's generate a serial data stream then sent to the DDV display driver boards.
The ALI-53xx and ALI-106xx use DSP engines programmed to output display data for the DDV-53 or -106 display drivers (one pair of audio channels). The "A" versions (e.g. ALI-53A) have analog input; the "D" versions are AES/EBU input.
Various "ballistic" and scale characteristics are possible, including multiple simultaneous display modes (e.g. a PPM "dot" over a VU "bar"). A program for displaying three different parameters simultaneously with separate red, yellow, and green segments is under development. Input modules for the 26 and 25-segment bargraphs are under development.
The modules require only +5VDC power. Interconnection with the DDV-53 or -106 display driver modules requires only simple serial data and clock lines (and optional brightness control line.).
analog input specifications | digital input specifications | |||
input impedance | 27 kOhm, balanced | input termination | 110 ohm balanced / 75 ohm | |
available input connectors | "phoenix" or XLR | unbalanced or unterminated (open) | ||
input level for 0 indication | +4 dBu (at default calib.) | available input connectors | "phoenix", XLR or BNC | |
maximum Input | +19 dBu (at default calib.) | sampling rate | 32 - 48kHz, auto-detect |
sell also: bargraph drivers / mounting PCBs
Tel: 415-595-5533 (Richard Dozier, Manufacturer Rep)
©2024 Prime LED